Maintenance And Service; Maintenance And Cleaning - Bosch 80+R60 Originalbetriebsanleitung

OBJ_BUCH-1347-001.book Page 34 Friday, January 21, 2011 10:30 AM
34 | English
Cause
Measuring result not plausible
The target surface does
not reflect correctly
(e.g. water, glass).
The laser beam outlet
16 or the reception lens
17 are covered.
Wrong reference level
set
Obstruction in path of
laser beam
The indication remains unchanged or the
measuring tool reacts unexpected after
pressing a button
Software error
The measuring tool monitors the
correct function for each meas-
urement. When a defect is deter-
mined, only the symbol shown
aside flashes in the display. In this
case, or when the above mentioned corrective
measures cannot correct an error, have the
measuring tool checked by an after-sales service
agent for Bosch power tools.

Maintenance and Service

Maintenance and Cleaning

Store and transport the measuring tool only in
the supplied protective pouch.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or
other fluids.
Wipe off debris using a moist and soft cloth. Do
not use any cleaning agents or solvents.
2 609 140 807 | (21.1.11)
Maintain the reception lens 17 in particular,
Corrective Measure
with the same care as required for eye glasses
or the lens of a camera.
Cover off the target
If the measuring tool should fail despite the care
surface
taken in manufacturing and testing procedures,
repair should be carried out by an authorised af-
ter-sales service centre for Bosch power tools.
Make sure that the
Do not open the measuring tool yourself.
laser beam outlet 16
In all correspondence and spare parts orders,
or the reception
please always include the 10-digit article number
lens 17 are unob-
given on the type plate of the measuring tool.
structed
In case of repairs, send in the measuring tool
Select reference lev-
packed in its protective pouch 23.
el that corresponds
to measurement
After-sales Service and Customer
Laser point must be
Assistance
completely on tar-
Our after-sales service responds to your ques-
get surface.
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
Press the measuring
www.bosch-pt.com
button 2 and the but-
Our customer service representatives can an-
ton for clearing the
swer your questions concerning possible appli-
internal memory /
cations and adjustment of products and acces-
On/Off 8 to reset the
sories.
software.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Bosch Power Tools