Troubleshooting; Cleaning And Care; Storing - Silvercrest 68847 Bedienungsanleitung

Bringing into use / operation / Troubleshooting / Cleaning and care / Storing
 
I nsert the connector plug into the socket in the
massage device. Position the lead to avoid
creating a trip hazard.
 
I f necessary pull the cover
massage device.
Note: The shiatsu massage device can be
used with or without a cover
 
P osition the shiatsu massage device on the
place to be massaged, e.g.:
• Upper back region (see Fig. C)
• Lower back region (see Fig. D)
• Legs (see Fig. E).
 
S witch on the shiatsu massage device with the
On / Off switch
1
This light and heat switch
switch the light and heat function on and off.
The light and heat switch
the device in massage mode as well as while
the device is switched off. However, the light
and heat function is only available while the
device is in massage mode.
Note: Two of the massage heads
heated and illuminated during use.
 
P ress the body part carefully against the shiatsu
massage device and move your weight around
little by little on or against the device.
Note: Do not lay, sit or stand with your full
weight on the moving parts of the device. Do
not stand any objects on the device.
Note: Always bear in mind that massage
should feel pleasant and relaxing. If necessary,
vary the pressure and / or your position. Stop
the massage immediately if it starts to feel pain-
ful or unpleasant.
 
S witch off the shiatsu massage device with the
On / Off switch
1

Troubleshooting

 
Problem
Cause
Remedy
Massage heads rotate slower and slower
Too much pressure on massage heads
Reduce pressure on massage heads
68847_silv_Shiatsu_Massagegeraet_Content_LB5.indd 33
over the shiatsu
4
.
4
.
can be used to
2
can be used with
2
are
3
after use.
Massage heads do not move
Device is not connected to the mains supply
Insert the plug-in mains adapter and switch on
the device.

Cleaning and care

 
 
OF LIFE FROM ELECTRIC
SHOCK! Always pull the plug-in
mains adapter from the mains socket before
cleaning the shiatsu massage device.
 
RISK OF ELECTRIC SHOCK!
Ensure that the shiatsu massage de-
vice is completely dry before you
connect the plug-in mains adapter to the shiat-
su massage device. Otherwise there is a risk of
electric shock.
 
C AUTION! Do not use chemical cleaners or
scouring agents for cleaning the shiatsu mas-
sage device. Otherwise you may damage it.
 
C lean the device only in the manner indicated.
Under no circumstances must any liquid be
allowed to enter the device or the accessories.
 
S mall stains can be removed with a cloth or moist
sponge and if necessary with a little mild deter-
gent. Do not use solvent-containing cleaners.
  
C lean the cover
with the cleaning symbols on the la-
bel. It is machine-washable. Set the
washing machine on a gentle 30 °C washing
program.
 
U se a mild detergent at the dose recommend-
ed by the manufacturer.

Storing

 
 
C AUTION! Let the shiatsu massage device
cool before putting it away.
 
I f the shiatsu massage device is not to be used
for some time, store it in the original packaging
in a dry environment and do not place any ob-
jects on top of it.
RISK OF LOSS
in accordance
4
GB/MT 33
26.07.11 10:23