Silvercrest SFR 37 B1 Bedienungsanleitung Seite 13

• When the battery is fully charged, the device can be used
for approximately 90 minutes without being connected to the
power supply.
1. Switch off the device with the on/off switch 6 if necessary.
2. Connect the plug-in power unit 17 to the socket 11 on the
device.
3. Insert the plug-in power unit 17 into an easily accessible wall
socket, the voltage of which corresponds to the rating plate.
4. The charging indicator 8 flashes and the battery is charged.
When the battery is fully charged, 100% is shown and the
charging indicator 8 is lit.
11
GB