Philips E 401 Serie Gebrauchsanweisung Seite 5

5
D. Mounting the transformer on the front of a panel
— Drill the holes as shown in Fig. 2.
— Fit the transformer to the panel by means of 3 screws (see C in
the table) having a maximum length of:
panel thickness + 9 mm.
E 434
For the values of B, K and L refer to the table.
Fig. 2 Fig. 3
E.
Mounting the transformer on the rear of a panel
— Drill the holes as shown in Fig. 3.
— Fit the transformer on the rear of the panel by means of 3 screws
(see C in the table) having a maximum length of
panel thickness + 9 mm.
E,3~
Fig. S