Torque Setting; Maintenance And Cleaning; Ec Declaration Of Conformity - Blaupunkt BPPT-001 Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

Torque setting

• The torque setting will help you regulate the driving power when using a screwdriver bit. This will help to prevent

damage to the workpiece and/or screw.

• For drilling set the torque selector to the position indicated by the drill bit symbol.

• Advice: Always start with the lowest torque setting ( 1 ) and increase if necessary.

Attention! Always remove the battery before carrying out any work on the machine.

To clean, always use a dry or moist, but not wet, towel. Many cleaning agents contain chemical substances which

may cause damage to the plastic parts of the machine. Therefore do not use any strong or inflammable cleaners

such as petrol, paint thinner, turpentine or similar cleaning agents.

Always keep air ventilation holes free of dust deposits to prevent overheating.

Herewith we,

Declaration of conformity

We declare that the product described

under "Technical Data" is in conformity with all relevant provisions of the directives 2014/30/EU, 2006/42/EC and

2011/65/EU including their amendments and complies with the following standards: EN55014-1:2006+A1+A2,

EN55014-2:1997+A1+A2, EN60745-1:2009+A11, EN60745-2-1:2010 and EN60745-2-2:2010.

The technical file, with the conformity declaration, is mantained in the offices of BLT Industrial Group Limited.

BLT Industrial Group Limited

20B, Fortis Tower, 77 Gloucester Road, Wan Chai, Hong Kong.

Subject to change; specifications can be changed without further notice.

The original instructions in this manual are written in English. Other language versions of this manual are a transla-

tion of the original instructions.

Inhaltsverzeichnis