Charging Methods - Klarstein 10009784 Bedienungsanleitung

Method of Using Space Isolator
Space Isolator is an accessory of the Robot Vacuum Cleaner; it blocks a certain area by emitting
special infrared signals, and restricts the cleaner from entering certain places where are not required to
be cleaned or relatively dangerous. As the effect is similar to what a wall can present, it is also named
as virtual wall.
For the specific method of use of the Space Isolator, please refer to the following figure:
Power
Selector Switch
Indicator
Power switch
The Robot Vacuum Cleaner can be directly manual charged by adaptor, or auto charging by the charging
dock station.
a. Manual Charge
1. Plug the Battery Charger into the charging socket
of the Robot Vacuum Cleaner, as shown on Fig 1.
2. Once the charging dock station is power on,
directly put the machine on the charging dock
station to charge.
3. Press and hold the "L" button and power on the
machine, then the Robot Vacuum Cleaner will
auto search the dock station for charging.
b. Auto Charge
1. Tear off the paper piece on the EVA film on the back
of the charging dock station, and fix t dock station
to wall surface with the EVA film. No object shall be
laid below it, as shown on Fig 2.
2. Connect one end of the Battery Charger to 220V 50Hz power supply and the other to the charging
socket of the charging dock station, as shown on Fig 3. Then the screen of the charging dock
station will display time.
Range
1.
2.
Infrared
wave emitter

Charging Methods

Don't align the infrared emitter to eyes during use.
A Space Isolator emitter is power supplied by 2 batteries
of D size battery, 1.5V. Three gears stands for the
effective distances of infrared emission, as shown as
follows:
Within 7M
3-5M
0-3M
15