IKEA UPPLEVA 24 Bedienungsanleitung Seite 14

Use subtitles
You can enable subtitles for each TV
channel. Subtitles are broadcast via Teletext
or DVB-T/DVB-C digital broadcasts. With
digital broadcasts, you have the additional
option of selecting a preferred subtitle
language.
Turn on/off subtitles
1. Press MENU on the remote control and
select OPTIONS > Subtitle.
OK/ to enter. (Refer to Figure 4.)
2. Press
3. Select the Subtitle option, and press
/ to select On/Off to turn on/off
subtitles.
Enable subtitle languages on digital TV
channels
1. Press MENU on the remote control and
select OPTIONS > Subtitle > Digital
Subtitle Language.
2. Press / to select a subtitle language as
your preferred language.
3. Press / to select Digital Subtitle
Language 2nd.
/ to select a secondary subtitle
4. Press
language.
5. Press EXIT to close the menu.
Shortcut operation: Press SUBT on the
remote control to directly select a subtitle
language available for selected digital TV
programme.
Select a subtitle type on digital TV
channels
1. Press MENU on the remote control and
select OPTIONS > Subtitle > Subtitle
Type.
2. Press / to select a subtitle type. You
can select Hearing Impaired to display
the hearing impaired subtitles with your
selected language.
Select decoding page language in
Teletext
Press MENU on the remote control and
select OPTIONS > Decoding Page
Language. Select a proper type of language
in which Teletext will display.
Digital Teletext language
For digital TV channels, your TV could zap
to a service with multiple initial Teletext
pages in different languages. This function
allows you to select an available language as
primary language which relates to different
initial Teletext pages.
Press MENU on the remote control and
select OPTIONS > Digital Teletext
Language. Press / to select.
SPDIF type
Connect to an audio device through the
SPDIF output. Press MENU on the remote
control and select OPTIONS > SPDIF
Type. Select a proper sound type from the
list for digital programmes.

If the current programme outputs
sound in Dolby D format, then
either PCM or Dolby D can be
selected.

If the current programme does not
output sound in Dolby D format,
only PCM can be selected. Otherwise
no sound will be output.

Off to turn off the audio
Select
output from the audio device
connected to the SPDIF output.
Note: The options you may choose depend
on the programme you are watching. If you
select PCM and the sound is ahead of the
picture, you can select SPDIF Delay from
the OPTIONS menu and press / to adjust
the delay time to synchronize the sound
with the picture.
T-Link
To search for CEC devices connected to the
HDMI sockets in your TV and enable one-
touch play and one-touch standby between
CEC devices.
Enable or disable T-Link
1. Press MENU on the remote control, then
select OPTIONS > T-Link.
2. Press / to select On or Off.
Use one-touch play
One-touch play enables you to press the
play button on, for example, your DVD
remote control. This starts playback on your
DVD device and automatically switches your
TV to the correct source, displaying DVD
content.
Use system standby
System standby enables you to press the
button on, for example, your TV remote
control. This switches your TV and all
connected HDMI devices to standby mode.
13