Siemens AR6181-RX Einbau- Und Inbetriebnahmeanleitung Seite 10

Installation
10
Siemens Building Technologies
Fire Safety & Security Products
Fig. 5: Installation with gasket 1
Installation of the Square housing with distance frame
For an installation with distance frame the gasket 1 has to be stuck on the back of
this distance frame. The position of the slits in the gasket has to correspond to the
position of the screw holes in the housing. The gasket 2 has to be stuck in the
distance frame.
Fig. 6: Installation with gasket 1 and 2
Gasket for the safety screw
Whether the reader will be mounted with or without distance frame, the gasket 3
has to be used in both cases. The accessory pack includes one gasket 3 as a
reserve.
Fig. 7: Use of gasket 3
04.2005