Herunterladen Inhalt Inhalt Diese Seite drucken

Electrical Connection; Connecting To A Battery - Electrolux RCW 42 DC Installation, Bedienung Und Wartung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

• At the delivery, please check if the unit is complete and has not been damaged during transport. For any objections,
return immediately to your supplier. Never connect a unit that has been damaged.
• Cleaning is recommended befor the first use. Use only delicate detergents with warm water. Absolutely avoid using
aggressive or abrasive detergents, steel wool, abrasive sponges or chemical solvents. After cleaning, dry all parts
carefully.
• Remove accessories from the box and examine to ensure they are complete.
• The room in which the equipment is to be installed must be dry and suitable ventilated, avoiding direct exposure to
the sun or positionning near a heat source. The place must be protected against beatring rain and dust.
• A good air circulation especially around the compressor is essential for a good operation. Keep the air vent ope-
nings of the compressor cover always free from any obstructions. Make sure that a minimum distance of 10 cm is
provided between the device and any wall located next to the device.
• To ensure proper function, the device must be standing horizontally. Use a water level to check and to correct if
necessary.
• The maximal permissible inclination of the
appliance is :
30° for RCW50DC
5° for RCW50AC
C
ONNECTING TO A BATTERY
The appliance must always be directly connected to the poles of a battery :
I
NTRODUCTION
I
NSTALLATION
E
C
LECTRICAL
ONNECTION
˜
Converter
Convertisseur
Convertidor
Umwandler
RCW50DC
I
F CONNECTING TO THE WRONG POLES
FUSE OF THE ELECTRONIC UNIT WILL BLOW
AND
DESTRUCTED
- 5 -
RCW50DC :
max. 30°
RCW50AC :
max. 5°
PLUS TO PLUS
MINUS TO MINUS
THE
ELECTRONIC
UNIT
!
,
THE
MAY
BE

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Rcw 42 ac

Inhaltsverzeichnis