Kärcher CS 330 Bp Originalbetriebsanleitung Seite 30

 Apply kerf.
 Determine holding band - at least 1/8 of
the stem diameter.
Give a warning sign (call or signal) prior
to the felling cut!
A Kerf
B Holding band
C Hinge
D Insertion / felling cut
DANGER
Mortal danger on account of cut! Always
apply the saw chain guide bar with the bot-
tom side of the guide bar tip upon the inser-
tion. Never insert with the upper side - risk
of kick-back!
 Apply felling cut, for this purpose, insert
at least 3 cm above the bottom cut of
the kerf.
 Extend the insertion up to the hinge.
 Take the felling cut to the holding band.
 Do not cut the holding band!
DANGER
Mortal danger on account of falling tree!
Leave an adequate holding band.
 Step in the safe route of withdrawal at
the side of the stem.
Give a warning sign (call or signal) prior
to cutting the retaining strap!
30
 Cut the retaining strap diagonally from
top to bottom.
 Trigger the chain brake and quickly
move away from the falling tree via the
safe route of withdrawal.
Debranching
DANGER
Mortal danger on account of kick-back!
During debranching, ensure that the guide
bar / saw chain is not jammed.
 Debranch in the direction of growth - not
against it.
 Debranch from top to bottom.
 Free the work area from cut off branch-
es at regular intervals.
WARNING
Risk of injury! The stem can move during
debranching due to the changing weight
distribution. Chose the work area in a way
that there is no imperilment.
– 10
EN