Mounting Accessories; Operation; Switching On/Off - Westfalia ASS18 Originalanleitung

 Ensure that the charger is disconnected from the mains supply after
use, and is stored correctly.
 Do not leave batteries on charge for extended periods and never
store batteries on charge.
 The battery charger monitors battery temperature and voltage while
charging. Remove the battery once charging has been completed to
maximise charge cycles of the battery and not waste power.
 Batteries can become faulty over time, individual cells in the battery
can fail and the battery could short. The charger will not charge
faulty batteries. Use another battery, if possible, to check correct
functionality of the charger and purchase a replacement battery if a
faulty battery is indicated.
 Do not store Lithium-Ion battery packs in a discharged state long
term. This can damage the Lithium-Ion cells. For long-term storage,
store batteries in a high charge state disconnected from the power
tool.
 The capacity of batteries will reduce over time. After 100 charge
cycles, the battery's operation time and the maximum torque per-
formance of the tool will slightly reduce. This decline will continue
until the battery has minimal capacity after 500 charge cycles. This
is normal and not a fault with the battery pack.

Mounting Accessories

Remove the battery pack from the vacuum cleaner before maintaining
or cleaning, making any adjustments, changing accessories or storing
the vacuum cleaner. This is to prevent accidental starting of the
vacuum cleaner.
The vacuum cleaner accessories can be connected directly to the dust
container (6). Connect the vacuum cleaner accessories firmly to the
connection at the dust container (6) and in to each other.

Operation

Switching On and Off
• To switch on the vacuum cleaner, move the On/Off switch (2)
forwards ("ON" is visible).
• To switch off the vacuum cleaner, move the On/Off switch (2)
backwards ("OFF" is visible).
Operation
16