Fault
The remote control
does not work .
NOTE
►
If you are unable to resolve the problem by applying any of the aforemen-
tioned methods, please contact the Customer Service department .
Cleaning
risk of fatal injury from electrocution!
►
Remove the mains adapter from the power socket before starting to clean
the device .
Damage to the device!
►
To avoid irreparable damage to the device, ensure that no moisture gets
into it during cleaning .
►
Do not use caustic, abrasive or solvent-based cleaning materials .
These can damage the surfaces of the device .
♦
SSTB 10 B2
Possible cause
The remote control is
pointing the wrong way .
The distance between
the remote control and
the device is too great .
The batteries in the
remote control are empty .
DANger
CAUTION
Clean the surfaces of the device with a soft, dry cloth . For stubborn dirt, use
a slightly damp cloth with a mild detergent .
remedy
Point the remote control towards the
infrared sensor
on the front of the
device .
Move the remote control closer to
the device .
Replace the batteries .
GB │ IE │ NI
│
15
■