Using The Appliance; Switching The Appliance On And Off - Silvercrest SEAD 1800 A1 Bedienungsanleitung

GB
CY

Using the appliance

Switching the appliance on and off
8
NOTICE
► On the fi rst use the generation of a slight smell may occur, this is due
to residues from the production. It is completely harmless and disperses
after a short time. Provide for suffi cient ventilation, for example, open a
window.
1) Using the control dial "Temperature"
can set the temperature in 1°C steps. A signal tone sounds for every 5°C.
The set temperature appears in the display indicator "Set Temperature" 7.
2) Using the control dial "Minutes"
You can set the time in 1 minute steps. A signal tone sounds for every
5 minutes. The set time appears in the display indicator "Minutes" 5.
3) Press the START/STOP
progress in indicated through the continous beam "
heating temperature is shown in the display indicator " Current Temperature"
6. Once the heating up is complete, signal tones sound, "
the display and the time set in the display indicator "Minutes" 5 begins to
count down.
NOTICE
► The backlight of the display switches itself off automatically about 5 minutes
after the last activation of a control knob. The display switches itself back
on upon the activation of a control knob.
As soon as the set time period has expired, signal tones sound. The appliance
switches itself off . „ " and „
NOTICE
► To stop a heating process or a boiling process, press the heating START/
STOP 9 button.
4) When the appliance is not in use, ALWAYS remove the plug from the mains
power socket.
9, set the desired temperature. You
3 set the desired cooking time in minutes.
9 heating button. The heating begins. The heating
" extinguish in the display.
". The momentary
" appears in
SEAD 1800 A1