Panasonic AW-HE50HE Bedienungsanleitung Seite 34

Basic operations
q Procedure for camera menu operation (AW‑RP655)
w
1
Press one of the [1] to [5] buttons of
[CONTROL/PREVIEW MONITOR OUT SEL] to
select the unit which is to be operated.
2
Press the [MENU] button to set the LCD panel
display to the menu mode.
3
Turn the jog dial (main) until CAMERA
SETTING appears, and press the [OK] button.
CAMERA SETTING
4
When the scene selection menu has appeared
on the LCD panel, select the scene to be set,
and press the [OK] button.
SCENE
The scene names displayed on the LCD panel correlate
with the scene files of the AW‑HE50 as shown below.
AW‑RP655 display
HALOGEN
FLUORESCENT
OUTDOOR
USER
5
When the following message appears on the
LCD panel, press the [OK] button again.
OPEN CAMERA MENU ?
The menu of the AW‑HE50 is displayed on the monitor.
OK Key
HALOGEN
OK Key
AW‑HE50 scene file
Manual1
Manual2
Manual3
FullAuto
OK Key
6
Turn the jog dial (main) to select menu items of
the AW‑HE50 and change the data.
Turn the jog dial (main) when the cursor is to be moved
up or down or the settings are to be changed.
Press it when moving to the menu at the next lower
hierarchical level or changing a setting at the very
bottom hierarchical level.
7
Press the [MENU] button for 2 seconds to exit
the camera menu.
Notes
w p Genlock is set using the camera menu for the
AW‑HE50.
w p It may be necessary to upgrade the software version
in order to operate an AW‑HE50 from an AW‑RP655.
Ask your dealer for details.
33 (E)