♦
After selecting a suitable time for the level of soiling, start the cleaning
process by pressing the ON button
■
During the cleaning procedure, you will hear a chirping sound .
■
The operating LED
■
The time counts down to zero on the display
off automatically .
♦
To check the progress, even during the cleaning process, the cleaning
process can be paused by pressing the OFF button
♦
Press the ON button
♦
After the cleaning process finishes, disconnect the appliance from the
power, open the lid
stainless steel bath
♦
Rinse the cleaned parts thoroughly with clean water before drying them
with a soft and dry cloth .
NOTE
►
Most dirt particles detach or loosen after the first cleaning . If there is still
dirt residue after the cleaning, take a soft cloth and remove it by wiping
gently . If you have still not removed all of the dirt particles, repeat the
cleaning process once the appliance has cooled down .
DANGER
►
Always disconnect the appliance from the socket after use and before
pouring out the cleaning fluid .
♦
To pour out the cleaning fluid, hold the appliance over a sink, flip up the lid
6
SUR 46 C2
lights up during the cleaning process .
5
to resume the process .
2
and carefully remove the respective item from the
6
.
7
and tip out the water via the front opening .
.
2
and then the appliance switches
.
4
GB
31