Troubleshooting - Silvercrest SEF 2300 A1 Bedienungsanleitung

Troubleshooting

GB
IE
PROBLEM
The appliance is not
working.
or
The control lamp integrated
into the on/off switch 7
does not light up.
The appliance has switched
itself off during use and
cannot be switched back
on.
The green control lamp 8
does not light up.
If the malfunction cannot be corrected with the above suggestions, or if you have determined
that the malfunction may have other causes, please contact our Customer Service.
18
POSSIBLE CAUSE
The appliance is not connected
with a mains power socket.
The appliance is damaged.
The on/off switch 7 has not
been activated.
The heat protection function
has been activated.
The heat protection function
has been activated.
The selected temperature for
the cooking oil/fat has not
been reached.
POSSIBLE
SOLUTIONS
Connect the appliance to
a mains power socket.
Contact Customer Services.
Press the on/off switch 7.
1. Remove the power plug
and allow the appliance
to cool down.
2. Press the reset button on
the control and heating
element 0.
1. Remove the power plug
and allow the appliance
to cool down.
2. Press the reset button on
the control and heating
element 0.
Wait a few minutes until the
required temperature has
been reached.
SEF 2300 A1