Technical Data - Westfalia 81 19 94 Bedienungsanleitung

Technical Data

Please note that the pulling force will be increased if the load to be pulled is not
rolling or if the load is not lying on a firm and even ground.
When pulling an object in straight pulling and using the pulley, the stated pulling
capacity (LC) 7.85 kN (is equal to 785 daN) is the maximum capacity that can be
performed with the hand power puller.
The pulling load of 4 tons refers to the maximum load that can be pulled with the
hand power puller while using the pulley. If the pulley will not be used, the pulling
load is reduced to half.
Pulling Load
Pulling Capacity (LC)
Steel Cable
Standard
Weight (without mounting plate)
Dimensions
Technical Data
4000 kg
7.85 kN
Length 3 m / Ø 5 mm
EN 12195-4
approx. 5 kg
760 x 100 x 160 mm
18