Be careful when the tie down crack, break or come
loose. The tie down can spring back with great
energy. Move away from the danger area.
Do not exceed the maximum load of 150 daN for tie
down lashing resp. of 300 daN for strapping.
Please note that due to wind accelerating and lateral
forces may occur when fastening the load on a
vehicle. The load can move or sink. Check the cargo
after the first few kilometres and after a while again.
Make sure that the fastening points on a vehicle are
suitable and firm enough to hold the load.
Do not pull the belt over rough and sharp edges.
Do not disassemble the belt and do not try to repair it
yourself. The ratchet tie down does not contain parts
serviceable by you. If any problems occur, contact our
customer service.
Safety Notes
5