Endress+Hauser Memosens CPS16D Betriebsanleitung Seite 13

CPS16D/CPS76D/CPS96D
10.3 CPS76D
BB, BP electrode version
Do not install the electrodes upside down. The inclination angle must be at least 15° from the
horizontal. A smaller inclination angle is not permitted as it could cause an air bubble to form in the glass
sphere and prevent the inner electrolyte from completely wetting the pH diaphragm.
BU electrode version
This electrode is suitable for upside-down installation. You can install it at any angle.
A
15°
Fig. 6: Installation angle for BB and BP versions
A Permitted orientation
B Incorrect orientation
11 Wiring
The sensor is connected to the transmitter via the measuring cable CYK10.
Fig. 8: Measuring cable CYK10
Endress+Hauser
15°
B
a0003133
Fig. 7: Any installation angle for BU version
360°
a0003350
Wiring
a0005193
13