OBJ_BUCH-2461-001.book Page 12 Monday, April 20, 2015 4:52 PM
12 | English
Nur für EU-Länder:
Gemäß der europäischen Richtlinie
2012/19/EU müssen nicht mehr gebrauchs-
fähige Messwerkzeuge und gemäß der euro-
päischen Richtlinie 2006/66/EG müssen de-
fekte oder verbrauchte Akkus/Batterien
getrennt gesammelt und einer umweltgerech-
ten Wiederverwendung zugeführt werden.
Nicht mehr gebrauchsfähige Akkus/Batterien können direkt
abgegeben werden bei:
Deutschland
Recyclingzentrum Elektrowerkzeuge
Osteroder Landstraße 3
37589 Kalefeld
Schweiz
Batrec AG
3752 Wimmis BE
Änderungen vorbehalten.
English
Safety Notes
Read and observe all instructions. The inte-
grated protections in the measuring tool may
be compromised if the measuring tool is not
used in accordance with the instructions pro-
vided. SAVE THESE INSTRUCTIONS FOR FU-
TURE REFERENCE.
Have the measuring tool repaired only through qualified
specialists using original spare parts. This ensures that
the safety of the measuring tool is maintained.
Do not operate the measuring tool in explosive environ-
ments, such as in the presence of flammable liquids,
gases or dusts. Sparks can be created in the measuring tool
which may ignite the dust or fumes.
Product Description and Specifications
Working optimally with the measuring tool
is possible only when the operating manual
and working instructions are read complete-
ly, and the instructions contained therein
are strictly followed. SAVE THESE INSTRUC-
TIONS.
Please unfold the fold-out page with the representation of the
measuring tool and leave it unfolded while reading the operat-
ing instructions.
Intended Use
The measuring tool is intended for quick and precise
measuring of inclines.
Product Features
The numbering of the product features shown refers to the
illustration of the measuring tool on the graphic page.
1 Spirit level for horizontal alignment
2 Serial number
3 Battery lid
4 Latch of battery lid
5 Illuminated display
6 Spirit level for vertical alignment
7 Audio signal button
8 Button for changing the unit of measure
9 "ON/OFF" button
10 Button for calibration "Cal"
11 "HOLD/COPY" button
12 Protective pouch
Display Elements
a Alignment aids
b/c Units of measure: °; %; mm/m
d "H" indicator for "HOLD" memory value
e Reading
f Battery indicator
g Indicator for audio signal
1 609 92A 11S | (20.4.15)
Bosch Power Tools