Entsorgung; English; Safety Instructions; Product Description And Specifications - Bosch GIM Professional 60 Originalbetriebsanleitung

12 | English

Fax: (01) 797222011
E-Mail: service.elektrowerkzeuge@at.bosch.com
Luxemburg
Tel.: +32 2 588 0589
Fax: +32 2 588 0595
E-Mail: outillage.gereedschap@be.bosch.com
Schweiz
Unter www.bosch-pt.com/ch/de können Sie online Ersatzteile
bestellen.
Tel.: (044) 8471511
Fax: (044) 8471551
E-Mail: Aftersales.Service@de.bosch.com

Entsorgung

Messwerkzeuge, Akkus/Batterien, Zubehör und Verpackungen
sollen einer umweltgerechten Wiederverwertung zugeführt wer-
den.
Werfen Sie Messwerkzeuge und Akkus/Batterien
nicht in den Hausmüll!
Nur für EU-Länder:
Gemäß der europäischen Richtlinie 2012/19/EU müssen nicht
mehr gebrauchsfähige Messwerkzeuge und gemäß der europäi-
schen Richtlinie 2006/66/EG müssen defekte oder verbrauchte
Akkus/Batterien getrennt gesammelt und einer umweltgerech-
ten Wiederverwendung zugeführt werden.
English

Safety instructions

All instructions must be read and observed.
The safeguards integrated into the measuring
tool may be compromised if the measuring tool
is not used in accordance with these instruc-
tions. STORE THESE INSTRUCTIONS IN A SAFE
PLACE.
Have the measuring tool serviced only by a qualified spe-
u
cialist using only original replacement parts. This will en-
sure that the safety of the measuring tool is maintained.
Do not use the measuring tool in explosive atmospheres
u
which contain flammable liquids, gases or dust. Sparks
may be produced inside the measuring tool, which can ignite
dust or fumes.
Product Description and
Specifications
Please observe the illustrations at the beginning of this operat-
ing manual.

Intended Use

The measuring tool is intended for quick and precise measuring
of inclines.
The measuring tool is suitable for indoor and outdoor use.

Product Features

The numbering of the product features shown refers to the illus-
tration of the measuring tool on the graphic page.
(1) Level for horizontal alignment
(2) Serial number
(3) Battery compartment cover
(4) Battery compartment cover locking mechanism
(5) Display
(6) Level for vertical alignment
(7) Audio signal button
(8) Button for changing the unit of measure
(9) On/off button
(10) Calibration button Cal
(11) Button Hold/Copy
(12) Protective bag
Display Elements
(a) Alignment aids
(b) Units of measure °; %
1 609 92A 58M | (28.11.2019) Bosch Power Tools