Troubleshooting - Grundig GTS 38271GC Bedienungsanleitung

8.Troubleshooting

Drying operation takes too long.
• Fibre filter (interior and exterior filter) pores may be clogged. >>> Wash
the fibre filters with warm water and dry.
• Evaporator front side may be clogged. >>> Clean the front side of the
evaporator.
• The ventilation grills in front of the machine may be closed. >>> Remove
any object in front of the ventilation grills that blocks air.
• Ventilation may be inadequate because the are the machine is installed
in is too small. >>> Open the door or windows to prevent the room
temperature from rising very high.
• A lime layer may have accumulated on the humidity sensor. >>> Clean the
humidity sensor.
• Excessive amount of laundry might be loaded. >>> Do not load the drying
machine excessively.
• Laundry might not have been wrung adequately. >>> Perform a higher
speed wringing on the washing machine.
Clothes come out damp after drying.
C
Laundry that comes out at the end of the drying process feels more
humid than it actually is.
• A program not suitable for the laundry type may have been used.>>>
Check the maintenance labels on the clothes and select a program
suitable for the clothes' type or use time programs as extra.
• Fibre filter (interior and exterior filter) pores may be clogged. >>> Wash
the filters with warm water and dry.
• Evaporator front side may be clogged. >>> Clean the front side of the
evaporator.
• Excessive amount of laundry might be loaded. >>> Do not load the drying
machine excessively.
• Laundry might not have been wrung adequately. >>> Perform a higher
speed wringing on the washing machine.
Drying machine does not turn on or program cannot be started. Drying
machine does not run after it is configured.
• Power plug might be unplugged. >>> Make sure the power cord is
plugged in.
• Loading door might be open. >>> Ensure that the loading door is properly
closed.
• A program might not be set or Start / Pause /Cancel button might not
be pressed. >>> Check that the program is set and it is not in Pause
position..
• Child lock may be activated. >>> Turn off the child lock.
DE
EN
71