Maintenance And Cleaning; Door Inner Surface - Grundig GTS 38271GC Bedienungsanleitung

7.Maintenance and
cleaning
7.1Loading Door Inner Surface
The hair and fibres that are
separated from the laundry during
drying process is collected by the
Fibre Filter.
C
Fibres are formed during
wearing and washing
.clothes
A
After each drying cycle,
clean the fibre filter and the
inner surface of the loading
.door
C
You can clean the filter slot
.with a vacuum cleaner
To clean the fibre filter:
• Open the loading door.
• Hold the first part (inner filter) of
the two part fibre filter and remove
it by pulling it upwards.
• Collect the hair, fibres and cotton
balls with hand or with a soft cloth.
• Remove the second part (outer
filter) by pulling it upwards.
C
Ensure that hair, fibre and
cotton balls do not fall into
the slot where the filters
.are installed
• Open both fibre filters (inner and
outer filters) remove the hair, fibre,
cotton balls with your damp hand
or a vacuum cleaner or a cloth.
•
• Clean both filters under water
running in reverse direction of
fibre accumulation or with a soft
brush. Dry the filter before placing
it back.
DE
EN
67