Starting The Programme; Child Lock - Grundig GTS 38271GC Bedienungsanleitung

1. Open the loading door and put the
laundry in.
2. Select the drying programme,
spin speed and, if required, the
auxiliary functions.
3. Press End Time Setting selection
button to set the desired End
Time Setting symbol lights up
on the display.(When the button
is pressed and hold, End Time
proceeds uninterruptedly).
4. Press Start/Pause button. End
Time Setting starts to count
down. The ":" in the middle of the
displayed End Time Setting will
start to flash.
C
Additional laundry may be
loaded / taken out during the
End Time period. At the end
of the End Time countdown
process, End Time symbol
disappears, drying process
starts and the programme
duration is displayed. The
time on the display is the
total of normal drying time
and delay time.
Changing the Delay Time
If you want to change the time during
countdown:
1. Press On/Off/Cancel button
for 3 seconds to cancel the
programme. Restart the machine
and repeat the End Time
procedure for the desired time.
2. When your machine is operated
for the first time, it starts with
the declaration programme
(wardrobe dryness for cottons).
Canceling End Time function
If you want to cancel the Time Delay
countdown and start the programme
immediately:
64
1. Press On/Off/Cancel button
for 3 seconds to cancel the
programme.
2. Press On/Off/Cancel button to
start the programme you have
previously selected.

6.7 Starting the programme

Press Start/Pause button to start the
program.
Start symbol will light up to
indicate that the programme has
started and ":" symbol in the middle
of the remaining time will keep
flashing.

6.8 Child Lock

Machine is equipped with a
Childproof Lock which prevents
interfering with the current
programme flow by pressing any
button. All buttons except the On/Off/
Cancel button on the control panel
are deactivated when the Child-proof
Lock is active.
In order to activate the Child Lock,
press Audio Warning and Child Lock
button for 3 seconds.
To start a new programme after the
current programme is over or to
interrupt the current programme,
the Child Lock should be deactivated.
Press the same button for 3 seconds
again to deactivate the Child Lock.
C
Lock symbol will appear on
the display when the Child-
proof Lock is activated.