General Notes; Refrigeration Unit Fs0900Se, Fs1200Se, Fs1400Se, Fs1800Se, Fs2400Se, Fs0900-, Fs1200-, Fs1400-, Fs1800-, Fs2400 Split; Refrigeration Unit Cs0500Se, Cs0900Se, Cs1300Se, Cs2000Se, Cs2800Se, Cs0900-, Cs1300-, Cs2000-, Cs2800 Split; Conditions Of Guarantee - Viessmann FS0900SE Betriebsanleitung

1.

General notes

1.1 Refrigeration Unit
FS0900SE, FS1200SE, FS1400SE, FS1800SE, FS2400SE,
FS0900-, FS1200-, FS1400-, FS1800-, FS2400 Split
The units are designed for cooling of refrigeration rooms in
which goods are stored between -25°C and -1°C.
1.2 Refrigeration Unit
CS0500SE, CS0900SE, CS1300SE, CS2000SE, CS2800SE,
CS0900-, CS1300-, CS2000-, CS2800 Split
The units are designed for cooling of refrigeration rooms in
which goods are stored between +19°C and -2°C.
2.

Conditions of guarantee

- The guarantee is valid for 1 year. It begins upon delivery
as shown by the delivery note or invoice.
- Within the period of guarantee, defects resulting from
poor workmanship or material problems will be repaired
free of charge.
- Other claims, in particular for follow up damages, are
excluded.
- Damage and functional problems caused by improper
handling or non observation of operating instructions, are
not covered by guarantee.
- The guarantee is invalidated if the cooling circulation
system is opened by unauthorized personnel, if there is
interference in the system, or if the serial number on the
machine is changed or rendered unreadable.
General notice (liability): the details of this technical documents serve for description. Consents regarding the availability of certain features or
regarding a certain purpose always require a special written agreement.
Page No. 5237337-06 GB
3.

Area of installation

- The area of installation must be well ventilated and
may not be heated.
- Direct heat radiation on the cooling unit must be
avoided. This could result in higher consumption.
- For economical operation the ambient temperature
should be between +5°C and +25°C.
- There must be sufficient space in front of the
ventilation openings to guarantee proper ventilation:
at least 250 mm in front of all suction and exhaust
openings.
4.

Energy savings

- Do not install cooling unit near any source of heat;
high ambient temperatures cause the cooling unit to
switch on too often.
- Direct sunlight increases energy consumption.
- Avoid unnecessary and long opening of the door.
- Monitor storeroom temperature.
- Clean cooling unit regularly. Clean equipment saves
energy and increases useful life.
- Observe cleaning intervals (see section "Cleaning and
maintenance of cooling unit").
- Regular maintenance prolongs product life.
5.

Standards and regulations

At the time of its production, the cooling unit was
manufactured and inspected according to valid
standard and regulations.
It corresponds to the following guidelines, among
others: BGR 500 Kapitel 2.35, DIN EN 378,
DIN EN 50178
The equipment was tested in the plant for proper
sealing of the cold circulation system.
1 - 5
GB
Rights reserved to make technical changes!