Operation; Filling In Detergents - Kärcher BD 40/25 C Bp Originalbetriebsanleitung

 Insert the suction hose.

Operation

ATTENTION
Risk of damage. Raise the suction bar be-
fore reversing.
Note:
To put the brush drive out of operation im-
mediately release the control handle.

Filling in detergents

ATTENTION
Risk of damage. Only use the recommend-
ed detergents. For other detergents the op-
erator bears the increased risk regarding
the operational safety and risk of accidents.
Only use detergents that are free from sol-
vents, hydrochloric acid and hydrofluoric
acid.
Follow the safety instructions for using de-
tergents.
Note:
Do not use highly foaming detergents.
Recommended detergents:
Application
Routine cleaning of all water
resistant floors
Routine cleaning of glossy
surfaces (e.g. granite)
Routine cleaning and basic
cleaning of industrial floors
Routine cleaning and basic
cleaning of fine stoneware
tiles
Routine cleaning of tiles in
sanitary areas
 Open the cover of the fresh water reser-
 Fill in the water detergent mixture up to
 Close the cover of the fresh water res-
When the running gear is turned to the front
the appliance can be pushed to the place of
use without any contact of the brushes with
the floor.
 Raise the vacuum bar.
 Press the appliance to the bottom using
 Turn the running gear to the front with
 Use the push handle to push the appli-
Detergent
RM 745
RM 746
RM 755 es
1 OFF
RM 69 ASF
2 Scrubbing suction
RM 753
3 Wet scrubbing
RM 751
– 7
EN
Cleaning and disinfection in
sanitary areas
Removal of coating from all
alkali-resistant floors (e.g.
PVC)
Removal of coating from li-
noleum floors
voir.
the MAX marking of the filling level dis-
play. Maximum temperature of the liq-
uid 60°C.
ervoir.
Driving to the Place of Use
the push handle.
your foot.
ance to the place of use.
Cleaning Programs
3
2
1
Appliance is out of operation.
Wet clean the floor and vacuum up dirt
water.
Wet clean the floor and allow the deter-
gent to react.
RM 732
RM 752
RM 754
4
5
23