Hama 00053103 Bedienungsanleitung Seite 37

d Bedienungsanleitung
Position the camera to view the area in question.
Enter a name for this area in the fi eld Position name: and confi rm your choice with Add.
You can then select this position in the list of Available positions and move the camera to it by clicking Go to position.
If you no longer require a certain position, you can select this from the saved list and remove it by clicking Delete.
When there is more than one position, you can have the camera run through them all, one after the other.
Further information is available in point 2.3.2 (Tour with user-defi ned sequence).
The system can also run a pre-set camera tour. Further information is available in point 2.3.3 (Tour with pre-selected sequence).
Click the item Panning, tilting, zooming in the menu to access these settings.
2.3.2 Tour with user-defi ned sequence
You need to defi ne a tour if you want the camera to perform it.
Click Add to include a new tour, Change to alter it and Delete to remove it.
Click Start/Stop to start or fi nish this tour. After starting the tour, switch to Camera menu to watch it.
Adding a new tour:
Click Add.
The system displays a window in which you can set the parameters for the tour.
First select a Name for the tour.
36