Camera Settings - Hama 00053103 Bedienungsanleitung

d Bedienungsanleitung
After you have logged in for the fi rst time, the system displays the following message in Internet Explorer:
This wireless LAN camera requires a special ActiveX plug-in to display the live image in Internet Explorer. To install this plug-in, click
the message displayed under the address bar.
Then select "Install ActiveX Control..." in the pop-up menu that is displayed.
Select "Install" to start the installation process.
After the ActiveX control is correctly installed, you should be able to see the live image from the internet camera in the black section
of the following image.
If the system displays error messages or if you cannot see any image after installation, we recommend that you install the latest
version of the Microsoft DirectX drivers.
You can fi nd them on Microsoft's website: http://www.microsoft.com.

2.2 Camera settings

Language settings:
The camera's menu can be set to either German or English. To change the language, select the one you want from the menu bar in the
web interface: this menu is located in the top right of the web interface.
You are now on the camera's start page. It shows the camera's live image. You can select different camera settings here and use the
digital functions for panning, tilting and zooming.
34