Using The Appliance - Philips HF3330 Bedienungsanleitung

The display shows a timer countdown time of 15 minutes, but the
,
timer does not count down. It only starts to count down when the
timer time is adjusted.
The display shows an alarm time of 12:00 a.m. and shows the
,
normal clock time, but the alarm mode is off.
Note: The appliance remains switched on in demo mode until it is switched
off.
To deactivate the demo mode, press and hold the on/off button for 10
seconds.

using the appliance

1 Press the on/off button briefly to switch on the appliance (Fig. 8).
The touchscreen display goes on.
,
Note: If you do not touch the display or press any button for 5 minutes when
the display is switched on and the appliance operates on battery power, the
appliance switches off automatically to save battery power.
Note: If you want to switch off the appliance, press and hold the on/off
button for 2 seconds.
2 Briefly press the on/off button again to switch on the LED panel.
The timer counts down the set time.
,
Note: The default treatment time is 15 minutes. Use the timer to change the
treatment time (see section 'Setting the timer' in chapter 'Preparing for use').
When the countdown is finished, the LED panel switches off
,
automatically.
Note: If you want to switch off the LED panel before the countdown is
finished, press the on/off button briefly.
3 Press the plus or the minus button to change the light
intensity (Fig. 11).
You can increase or decrease the intensity in increments of 25%.
EnglisH
17