Canon ELPH 2 IXUS II Bedienungsanleitung Seite 48

Setting the Custom Functions
flHV
'"'I i'fTTr',TTi
-' -rr
0
Off
1 On
Flash Mode Memory
0
Oft
1 On
0
KScF^BN- :
1
r
CF
1-
. n u
:
r
Select custom function
setting.
• Perform this step with the camera
switched off.
• Hold down the h/ button and
press the SET button.
• Use the push-button projection on
the strap buckle to push the
button. (-»p.
12
)
• "CF 1-0" appears on the LCD
panel.
Select a function.
• The selected function changes
sequentially from CF1 to CF2 to
CF3. and back to CF1, each time
you press the SELECT button.
• Use the push-button projection on
the strap buckle to push the
button. (-> p.
12
)
Set the function.
■ Press the SET button to change
the setting display to 1 (function
enabled). Press the SET button
again to change the setting to 0
(function disabled).
• Press the DATE button or the
Main switch when setting is
complete.
The custom function settings are retained even when
you switch the camera off and on, replace the film
cartridge, or replace the battery.
0-48