Canon ELPH 2 IXUS II Bedienungsanleitung Seite 27

Changing the Flash Mode
You can switch the flash off or set it to fire each time you
take a picture. Select the mode that best suits your subject
and your surroundings.
• The <H and <g>cn settings can be stored in the camera's
memory. At shipment, the camera is set so that the Hash mode is
(H when you switch the camera on. However, if you switch the
camera off while the flash mode is set to <5>tn , that setting is
stored in the camera's memory and the Hash mode will begin from
<3><H when you switch the camera back on.
• You can use the CF2 custom function setting to specify that
whichever flash mode is active when you switch oH the camera
should be stored in the camera's memory. (-> p.48)
m
<
8
> {3 OATE
1 Flash mode button
Select the flash mode.
• Each time you press the j, button, the
black pointer at the top ol the
LCD panel moves to the next seHing.
• Position the black pointer under the
desired flash mode.
■* For the Auto flash without red-eye
reduction setting, the black pointer
is not displayed.
I Auto Hash without
<i>
red-eye reduction
|
(no ▲ displayed) (-> p.28)
(o) (L) Auto Hash with red-eye-
| reduction (-» p.29)
k Flash ON (—> p.31)-1
® Flash OFF (-. p.32)-
I
jg Slow synchro wilh red-eye reduction (-* p.33)-1
_i
■ When the (H or <§>i*i flash mode is selected so that the
flash fires automatically, the black pointer appears under the
i icon when you press the shutter button down halfway.