Siemens SIMATIC HMI KTP400F Mobile Produktinformation Seite 8

Connecting the connection box
X10 Contact Assignment
③ 1 Functional
grounding
2
3
4 PANEL PRESENT Output signal
5 STOP 13
6 STOP 14
7 STOP 23
8 STOP 24
9 ENABLE2+
10 ENABLE1–
11 ENABLE1+
12 ENABLE2–
Configuring the Connection box decentralized
Configuration in TIA Portal
When configuring the Connection box decentralized, use the article number 6AV2125-2AE23-0AX0 of the Connection box
advanced.
Diagnostics view in TIA Portal
In the diagnostic view of the TIA Portal, not all information is available for the "Accessible Nodes" for the Connection box
decentralized. The information can be retrieved via the Web Based Management (WBM) and the Command Line Interface
(CLI).
8
Circuits
Grounding and
24 V DC power
supply
M
Observe notes in the
P24
operating
instructions.
• +24 V DC if HMI
device plugged.
Maximum current
100 mA.
• 0 V if no HMI
device plugged.
Emergency stop /
stop button
Only for a hardwired
F-system
Enabling button
Only for a hardwired
F-system
①/② Fast connectors X1 and X2
③ Plug-in terminal strip X10
X1/X2 Contact Color
① 1 Yellow
②
2 White
3 Orange
4 Blue
Only if the PLC is connected directly to the
1
connection box.
Assignment Assignment
connection box PLC
RD+ TD+
TD+ RD+
RD– TD–
TD– RD–
Connection box decentralized
A5E52889212-AA, 09/2023
1