Kenwood GE-540 Bedienungsanleitung Seite 10

Operating instructions
M@ To preset a user-created
pattern
| 1 Recall the preset pattern.
pw | we [ms | a | ms
etelstele]
OA
Press one of the keys once.
2 Create a desired equalizer pattern.
60 | 150[400] ik [aax] 6x | isk,
£0 | so] a0o] ix Jean] 6x | ix |
While observing the displays, press the upper or lower key of
each frequency band.
| 3 Preset the equalizer pattern in memory.
PERE)
Press while
MEMORY] is
lighted.
Lights up. Goes off.
Press the key while the indicator ts blinking.
Created patterns can be preset under the M1 to M5 keys.
| originally-preset pattern:
100° GE-540 (En)
f To clear a user-preset pattern and return to the }
, Press the pattern key for more than 5 seconds. |
Equalizer level
control keys.
Preset Memory key
MIC MIXING
MEMO key
MIC jack
—@ Microphone Mixing
Except for the U.K. and Europe
1 Plug the microphone into the MIC Jacks.
? Adjust the mixing volume.
SOURCE MIC
@ The input source selected by an amplifier will be mixed with
the sound from the microphone, regardless of the setting
of the power switch of this unit (ON or OFF (STABD BY)).
To record the sound picked up by the micro- |
phone only, turn the MIC MIXING control
fully clockwise (toward MIC), set the amplifi-
er's input selector switch to an input to which |
nothing is connected.
i _______-~. er ar a eR REE RM ok chime ge AERIS OMAN S FoPHN ope teh m e d chee =
Notes:
1. Equalizer effect cannot be applied to the signal picked up
via microphone.
2. With the MIDI system, dubbing the soune from Deck A to
Deck B while microphone mixing is impossible.