Kenwood SLG-7 Bedienungsanleitung Seite 18

Changing the Communication Channel
If the audio is noisy or interrupted intermittently, there may be interference in the
communication channel. In this case, try changing the communication channel as
described below.
1
Press the RF key on the Transmitter.
Each time you press the RF key, the communication channel switches.
• Switching the channel on the Transmitter automatically switches the one on the Receiver.
• This product is equipped with three channels for use in communication.
If the reception cannot be improved by switching between channels, try changing the
installation locations of the Transmitter and the Receiver.
English
Transmitter
18