Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Switch the device off if it is not in use.
• Wear gloves.
WARNING
Avoid the risks associated with vibration, e.g. the risk of white
finger syndrome (circulatory disorders) by taking frequent
breaks from work where you rub your palms together, for ex-
ample.
• Always wear protective gloves and make sure your hands
are warm.
• Take regular breaks from work.
9. Before commissioning
• Open the packaging and carefully remove the device.
• Remove the packaging material, as well as the packaging
and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport damage.
• If possible, keep the packaging until the expiry of the war-
ranty period.
ATTENTION
The device and the packaging are not children's
toys! Do not let children play with plastic bags,
films or small parts! There is a danger of choking
or suffocating!
• Familiarise yourself with the product by means of the oper-
ating instructions before using for the first time.
• With accessories as well as wearing parts and replacement
parts use only original parts. Replacement parts can be ob-
tained from your dealer.
• When ordering please provide our article number as well
as type and year of manufacture for your equipment.
The petrol hedge trimmer is not filled with the fuel mixture
when delivered.
The device is operated with a mixture of petrol (unleaded) and
two-stroke motor oil.
Pay extra attention when handling petrol. Smok-
ing and naked flames are not permitted (risk of
explosion).
Before each commissioning, check the device for the following:
• Check the fuel system for leakage.
• Faultless condition and completeness of the guards and the
cutting device.
• Tight fit of all screw connections.
• Smooth running of all moving parts.
Fuel and oil
• Recommended fuels
-
Use only a mixture of unleaded petrol and special
2-stroke engine oil. Mix the fuel mixture as per the fuel
mixing table.
Do not use E10 fuel.
-
Attention:
Do not use a fuel mixture that has been stored for more than
90 days.
Attention:
Do not use 2-stroke oil that recommends a mixing ratio of
100:1. The engine guarantee of the manufacturer becomes
invalid in the event of damage to the engine due to insufficient
lubrication.
Attention:
Use only designated and approved vessels for the transport
and storage of fuel. Put the correct amount of petrol and
2-stroke oil into the enclosed oil-petrol mixing bottle (A). Then
shake the vessel well.
Never use oil for 4-stroke engines or water-cooled 2-stroke
engines. This can cause the spark plug to become fouled, the
exhaust part to become blocked or the piston ring to become
stuck. Fuel mixtures that have not been used for one month or
longer can clog the carburettor or impair engine operation.
Put unused fuel in an airtight vessel and store it in a dark, cool
room.
Fuel mixing table
Mixing procedure: 40 parts petrol to 1 part oil
Example:
1 l petrol: 0.025 l 2-stroke oil
5 l petrol: 0.125 l 2-stroke oil
Warning! Pay attention to the exhaust gases.
Always switch off the engine before refuelling.
Never add petrol to the device while the engine is running or
it is hot. There is a risk of fire!
Only fuel the unit outdoors or in well-ventilated rooms. Make
sure that no fuel gets into the soil (environmental protection).
Use a suitable surface. Only use bio chain oil.
Fuels only have a limited shelf life as they age. Expired fuels
and fuel mixtures can result in start problems. Therefore only
mix as much fuel as required for one months use. Only store
fuels in approved and labelled containers. Store the fuel con-
tainer in a dry and safe place.
Make sure that the fuel container cannot be
reached by children when stored.
Attention! Before commissioning, find out how to
take the device out of operation in an emergency!
9.1 Refuelling the petrol hedge trimmer
• Switch off the engine and allow it to cool!
• Wear safety gloves!
• Avoid skin and eye contact!
• Always observe, "Safe use of fuels", see 6.3.
1.
Only refuel the petrol hedge trimmer outdoors or in suf-
ficiently ventilated rooms.
2.
Clean the area surrounding the filling area. Impurities in
the tank lead to operational faults.
GB
25
Werbung
