Werbung
Verfügbare Sprachen
Verfügbare Sprachen
.. Switching the device on/off
Press and hold the
The display lights up.
Press and hold the
The display turns off.
Even when switched off, the internal battery is charged until it is fully charged.
If the device receives no signal in Bluetooth®/USB/AUX IN/LINE IN mode
for minutes, it automatically switches to standby mode.
FUNCTION button to switch the sound system back on from au-
Press the
tomatic standby mode.
If the playback volume on the external device is set too low, the sound
system may receive insufficient audio signal and automatically switches
to standby mode.
In this case, increase the playback volume on the external device and re-estab-
lish the connection with the sound system.
FUNCTION button to switch the sound system back on from au-
Press the
tomatic standby mode.
. Connecting external playback devices
.. Selecting the playback function
Switch on the sound system.
FUNCTION
Press the
ferent playback functions (AUX/LINE IN/USB/Bluetooth®).
.. Connecting a device via AUX IN
Use the AUX IN
vice (for example an MP player).
Switch off the sound system.
Switch off your external device.
Plug the end of a . mm jack cable into the AUX IN socket on the top of the
device.
Connect the other end of the cable to the audio output of your external device.
Switch on your external device.
Switch on the sound system.
FUNCTION button until you see AUX on the display
Press the
The audio signal from your external device will now be played back.
FUNCTION
FUNCTION button to switch the device off.
button several times to switch between the dif-
socket to establish a connection with an external playback de-
button to switch the device on.
.
Werbung
