Satellite systems
You can set here which satellite you can receive with your satellite aerial
(depending on the direction) and which receivable channels should be
displayed in the channel list.
Select the desired satellite in the list.
In order to set or remove a highlight, press the "
Play
Here you can change the other screen and audio settings:
Television
Video format
Volume bypass
Digital Audio
Television
Here you can adjust the display on the TV to fit the image format.
If your TV has the right setting choose the 16:9 setting. Channels in wide
screen format will then be displayed properly.
If you have a conventional TV select the 4:3 "letterbox" setting.
Transmissions in wide-screen format are then shown smaller. Black bars can
be seen at the top and bottom of the screen.
If you have a conventional TV and do not want to watch the transmission
smaller select the 4:2 "full screen" setting . Transmissions in wide-screen
format are then shown to fill the screen and cut to the left and right.
MD 24089a
4:3 (Letterbox),
4:3 (Full screen),
16:9
RGB, YUV, FBAS
On, off
PCM,
PCM, AC-3,
PCM, dts,
PCM, AC-3, dts
" key.
OK
UK
39