Yamaha GEP50 Bedienungsanleitung Seite 6

® UTILITY Button
This button accesses a list of utility functions allowing editing
of effect titles, MIDI control programming and increment
footswitch recall range programming.
© BYPASS Button
The BYPASS button switched the selected effect ON or
OFF, leaving the direct signal only when BYPASS is active.
® TUNER OUT Jack
The TUNER OUT jack can be connected directly to an elec¬
tronic guitar tuner allowing convenient tuning without the
need to unplug your instrument from the GEP50 input and
connect it to the tuner.
® INPUT Jack
Your guitar or other source can be connected here or to the
duplicate INPUT jack provided on the rear panel. The front-
panel INPUT jack takes priority, so if sources are plugged
into both the front- and rear-panel INPUTS, only the front-
panel INPUT will be active. The INPUT accepts a mono 1/4"
phone plug, and is unbalanced.
GEP50 GUITAR EFFECT PROCESSOR