Werbung
Mechanischer Teil
Allgemeines zum mechanischen Teil
Nach jeder Reparatur am Laufwerk sind die Képfe 65, 66, 67, die Ton-
wellen 43, 44, sowie die Andruckrollen 35 mit Spiritus oder Reini-
gungsbenzin zu reinigen.
Ausbauhinweise
1. Gehduse-Vordertell abnehmen (Abb. 1 und 2)
- Batteriefachdeckel abnehmen.
- 10Schrauben a herausdrehen.
- Beide Cassettenfachdeckel 1 und 2 durch Driicken der STOP/
' EJECT-Tasten 6ffnen.
- Gehduse-Vorderteil in Pfeilrichtung A (Abb. 2) abnehmen.
Mechanical Section
General notes relating to the mechanical section
The numbers in the text and on the diagrams are the same as the
position numbers of the exploded views in the spare parts list. Parts not
included in the spare parts list are denoted by letters.
If screws secured with lacquer have to be loosened, they must be
resecured in the same manner when the repair is complete.
For the mechanical section to operate reliably it is essential that the
rubber surfaces should be cleaned. Such surfaces shall be cleaned
using a cleaning agent ( cleaning benzene ).
Magnetic tools shail not be brought near the magnetic heads.
Before commencing service work, ensure that the capstans, the rub-
ber pinch rollers and the magnetic heads are free from particles
produced by tape abrasion. To clean these parts, use a cotton bud
saturated in methylated spirits or cleaning benzene.
Each time repair work has been carried out on the drive mechanism,
clean the heads 65, 66, 67, the capstans 43, 44, and the rubber pinch
rollers 35 with methylated spirits or cleaning benzene.
Disassembly Instructions
1.
Removal of the Front of the Cabinet (Figs. 1 and 2)
- Remove the battery cover.
- Remove the 10 screws a.
- Open both cassette compartment lids 1 and 2 by pressing the
STOP/EJECT button.
- Remove the front of the cabinet in the direction of arrow A (Fig. 2) .
Schaftschraube
@ Shankscrew
Abb. 1
Abb. 2
Fig. 1
Werbung
