Werbung
Verfügbare Sprachen
Verfügbare Sprachen
30. Back Colour Selection Switch (BACK COLOUR)
35. Colour Selection Switches
This control is used to select the background colour for
(BACK COLOUR,
WHITE)
MIX, WIPE, SUPERIMPOSE
and VIDEO
FADER
oper-
These 2 switches are used to select the colour of the
ations.
superimposed
titles, either white or the background
One out of the following eight background colours can be
colour selected by the Back Colour Selection switch @.
chosen:
White, Yellow, Cyan, Green, Magenta,
Red,
Blue and Black.
36. Title Effect Switch (TITLE EFFECT)
By depressing this switch, the superimposed titles can
31. Source Selection Switches
be changed as follows:
(SOURCE,
VIDEO
1/VIDEO
2/EXT
CAMERA)
VIDEO 1:
The video signal fed to either the
Normal — Narrow Border — Wide Border >
SOURCE
1 @® and @ or SOURCE
2
& Narrow Shadow — Wide Shadow >
and
@
connector
on
the
rear
panel, as selected by the Input Mode
Normal
Narrow Border
Wide Border
Selection switches © and the digital
frame synchronizer,
is selected.
VIDEO 2:
The video
signal fed to either the
/d\ »
/\ ™» /\ =»
SOURCE
1 ® and @ or SOURCE
2
6) and
@
connector
on
the
rear
Narrow Shadow
Wide Shadow
panel, as selected by the Input Mode
Selection switches
©, is selected.
>
/\ =>
EXT CAMERA:
The
video
signal
fed
to the
EXT
CAMERA
IN connector
@ on the rear
panel is selected.
37. Recording Video Output Selection Switches
(REC VIDEO OUT, VIDEO
1/VIDEO 2/EFFECT)
32. Superimpose ON/OFF Switch (ON)
These switches are used to select the output video sig-
This is the master
ON/OFF switch for the superimpose
nal of the REC VIDEO OUT connectors
@ and @ on
function.
the rear panel as follows.
VIDEO 1: The video signal fed to either the SOURCE
1 @ and @ or SOURCE
2 @ and @ con-
nector on the rear panel, as selected by the
Input Mode Selection switches @ and the
digital frame synchronizer, is selected
33. Reverse Switch (REVERSE)
VIDEO 2: The video signal fed to either the SOURCE
This switch is used to select the polarity
of the superim-
1@ and @ or SOURCE 2 @ and @ con-
EFFECT:
The special effects video signal (superim-
pose,
wipe/mix
or fade) is selected.
When turn on the superimpose ON/OFF
switch, the superimpose effect may be
not performed in the left and top edges.
Original Picture
Becomes the colour of title
38. Soft Wipe Switch (SOFT)
This switch is used for changing from normal wipe to
soft wipe.
Pressing this switch once, normal wipe changes to this
border wipe and the LED indicator in the switch lights.
If press this switch again, this border wipe changes to
thick border wipe and the LED indicator in the switch
still lights. To return to a normal wipe, press the switch
once again. The LED indicator goes out.
34. Key Level Controls (KEY LEVEL, LOWER, UPPER)
These two controls are used to adjust the luminance
level of the key signal for lower level (black) and upper
level
(white),
respectively
for clear
superimposed
pictures.
Note:
The colour on the border is a complementary
colour of the back colour setting.
(See page 16.)
Werbung
