Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SETTING FURTHER CHANNELS
Displaying signal information
(only for digital television channels)
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
<
>
»
« or »
« and press »OK« to confirm.
3 Select the menu item »Source« with »
<
»
« and press »
– »Source« menu is active.
4 Select the line »Advanced« with »
»
« and press »OK« to confirm.
Λ
5 Select the line »Signal Information« with
»
« or »
« and press »OK« to confirm.
V
Λ
– »Signal Information« menu is displayed.
Notes:
Signal information changes depending on
7
the current source.
Signal information is shown at the top of the
7
menu. The more »Frequency« and »Signal
Strength« bar stretches to the right, the more
signal you have.
The signal level not only depends on your
7
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna using the
signal level display.
6 Press »EXIT« to close the menu.
102 / 115 TR
«, »
V
>
« or
« to confirm.
V
« or
V
-----------------------------------------------------
«,
Λ
Television / User Manual
Werbung
