Beko B49L 8840 Bedienungsanleitung Seite 211

SETTING FURTHER CHANNELS
Searching for digital channels
from the cable provider manu-
ally
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
3 Select the menu item »Source« with »
<
» « and press » « to confirm.
V
– »Source« menu is active.
4 Select the line »Manual Channel Search«
with » « or » « and press »OK« to
V Λ
confirm.
5 Select the option »Cable (DVB-C)« with
» « or » « and press »OK« to confirm.
V Λ
6 Select whether to search for digital or ana-
logue TV channels.
To to this press »
V
option »Digital« or »Analogue« and confirm
with »OK«.
7 With » « select »Frequency (MHz)«
V
and enter frequency (4-digit) directly with
»1...0«; search will start.
– The search is finished when the channels
found appear in the list.
8 Press »EXIT« to end the setting.
Television / User Manual
«, »
V Λ
>
« or
« or » « to select the
Λ
-----------------------------------------------------
Searching for digital terrestrial
TV channels automatically
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
< >
» « or » « and press »OK« to confirm.
«,
3 Select the menu item »Source« with »
<
» « and press »
– »Source« menu is active.
4 Press »BACK
level.
5 Select the line »Automatic Channel Search«
with » « or »
Λ
confirm.
6 Select the option »Air (DVB-T/T2)« with
» « or » « and press »OK« to confirm.
Λ V
7 Select whether to search for digital or ana-
logue TV channels.
To to this press »
option »Digital« or »Analogue« and confirm
with »OK«.
8 Press » « (red) to start searching.
Notes:
When updating via the same satellites a
7
security query is displayed at the start of a
search.
If the previously stored channels should
7
be retained in the channel list and the new
channels found be added to it, then press
» « (green).
If » « (red) is pressed, the saved channels
7
will be deleted from the current channel list.
– The »Digital Searching« menu appears,
and the scan for TV channels begins.
– The search is complete as soon as the
message »Search is completed!« appears.
Note:
The search can be aborted with »EXIT«.
7
9 Switch to the Channel Editor with »
(yellow) ;
or
press »EXIT« to end the setting.
«, »
V
>
« to confirm.
V
« to go back one menu
« and press »OK« to
V
« oder » « to select the
Λ V
97 / 115 TR
«,
Λ
« or
«