Werbung
Verfügbare Sprachen
Verfügbare Sprachen
NETWORK SETUP
Note:
For device to discover the wireless modem
7
on the network, the network name should
support ASCII characters.
10 Select the required character with »
<
>
»
«, »
« or »
« and move to the next
Λ
character with »OK«.
– Using »Shift«
between uppercase letters / numbers and
lowercase letters / special characters.
– Select »Del« to delete the character
entered and press »OK« to confirm.
11 Confirm the password with » « (green).
– »Connecting ... Please wait« message
will be displayed, and if the connection
is established »Connection To Gateway:
Success« messages will be displayed.
12 Press » « (green) to check the performed
settings and also if the local network and
internet connection has been established.
– »Testing ... Please wait« message will
be displayed, and if the connection is
established »Connection To Gateway:
Success«, »Internet Connection: Success«
messages will be displayed.
13 Press »EXIT« to end the setting.
Note:
If you do not have a dynamic network,
7
follow the instructions in manual connection
section.
Television / User Manual
-------------------------------------------------------------------------------------------
«,
V
»OK«, you can switch
Manual connection
Certain networks require Static IP address. If
your network requires a Static IP address, you
must enter the »IP Address«, »Netmask«, »Gate-
way« and »DNS« values manually. You can
get »IP Address«, »Netmask«, »Gateway« and
»DNS« values (IPS) from your Internet Service
Provider.
1 Open the menu with »MENU«.
2 Select menu item »Settings« with »
<
>
»
« or »
« and press »OK« to confirm.
3 Select the menu item »Network« with »
<
»
« and press »
« to confirm.
V
– »Network« menu is active.
4 Select the line »Change Connection Type«
with »
« or »
« and press »OK« to
V
Λ
confirm.
5 Select the option »Wireless« with »
>
»
« and press »OK« to confirm.
– WiFi warning screen will be displayed.
6 Confirm the message »Do you want to turn
on Wi-Fi?« select »Yes« with »
press »OK« to confirm.
7 Select the line »Network Configuration«
with »
« or »
« and select the option
V
Λ
<
»Manual« with »
« or »
– »IP Address«, »DNS«, »Netmask« and
»Gateway« options are active.
Settings > Network
Picture
Sound
Source
Change Connection Type
WiFi
Select Access Point
Network Configuration
Wake-on-LAN
IP Address
Connect
Test Connection
Change Area
8 Select the line »IP Address« with »
Enter IP address with »1...0«.
9 Select the line »DNS« with »
Enter DNS address with »1...0«.
10 Select the line »Netmask« with »
Enter Netmask address with »1...0«.
«, »
«,
V
Λ
>
« or
<
« or
<
>
« or »
« and
>
«.
Tuesday
xx xxx xxxx
TV
Network
Timer
Wired
On
N/A
Manual
Off
192 . 168 . 000 . 200
Input Mode
Back
Exit
BACK
EXIT
«.
V
«.
V
«.
V
87 / 115 TR
Werbung
