Beko B43 A 670 A Bedienungsanleitung Seite 93

CONNECTION/PREPARATION
Setting up or hanging
Select a location so that no direct sunlight falls
7
on the screen.
Setting up with stand
To mount the stand, refer to the installation
7
instructions included.
Place the TV set on a hard, level surface.
7
Installation preparation for VESA
installation kit
Contact authorised dealer to purchase the
bracket.
You will need the following:
A pair of scissors,
7
A cross-tip screwdriver.
7
Follow the installation instructions for the VESA
installation kit.
1 Place the TV set in the film on a smooth
surface with the screen facing down.
2 Cut open the film on the back side using the
scissors.
3 Connect the required cables to the connec-
tors on the TV set. See the "Connections"
section in this manual.
4 Tie the cables so they do not hang down
onto the floor.
5 Screw the VESA bracket onto the TV set
and mount it according to its installation
instructions.
Television / User Manual
-----------------------------------------------------
VESA
11 / 81 EN