Beko B43 A 670 A Bedienungsanleitung Seite 110

FUNCTIONING OF THE TV - BASIC FUNCTIONS
Switching on and off
1 Press »
8 « to switch on the television in
standby mode.
2 Press »
8 « to switch the television to standby.
Selecting channels
1 Use »1...0« to select channels directly.
2 Select television channels step by step with
»P+« or »P-«.
3 Open the channel list by pressing »OK«,
select the channel by pressing
buttons and confirm the channel with »OK«,
then close the channel list with »EXIT«.
Selecting channels from lists
1 Press »FAV« to recall the favorite list menu.
– »Favorites« menu will be displayed.
2 Select the channel with »
confirm with »OK«.
3 Press »EXIT« to exit the channel list.
Selecting a signal source
1 Press »
« to open the »Source« menu.
<
2 Press » « or »
signal source and press »OK« to confirm.
Adjusting the volume
1 Adjust the volume with »–
Muting
1 Use »p« to switch the sound off (mute) and
to switch it on again.
Displaying information
1 Press »?« to display the information.
– The menu on the screen disappears auto-
matically after a short while.
28 / 81 EN
« or »
V
« or » « and
V Λ
>
« to select the desired AV
+«.
o
Audio language
You can select various languages when watch-
ing digital channels. This depends on the pro-
gramme being broadcast.
1 Press »
2 Select the language with »
press »OK« to confirm.
3 Press »EXIT« to end the setting.
Subtitles
You can select various subtitles when watch-
«
Λ
ing digital channels. This depends on the pro-
gramme being broadcast.
1 Press »
2 Select the language with »
press »OK« to confirm.
3 Press »EXIT« to end the setting.
Swap function
This function allows you to switch between the
channel you are watching and the channel you
watched last.
1 Use »1...0« or »P+«, »P–« to select the
desired channel (e.g. channel 1).
2 Press »1...0« or »
channels (e.g. channel 2)
3 To return to Channel 1, press »BACK < «.
« to open the selection menu.
« or »
V
« to open the selection menu.
« or »
V
« » « to change the
Λ V
Television / User Manual
----
«and
Λ
«and
Λ