Silvercrest SPR 330 A1 Bedienungsanleitung Seite 14

Hold the cleaning attachment
press the spray button
t
nozzle
Fig. 9
Use the brush
light pressure. If necessary, add more water / cleaning solution to the soiled
area by pressing the spray button
Then press the suction opening
soiled area. Drag the cleaning attachment
direction to suck up dirt and liquid (see Fig. 10).
After cleaning, press the On/Off switch
Cleaning and maintenance
RISK OF ELECTRIC SHOCK!
► Switch the appliance off and pull out the power plug
the appliance!
CAUTION! PROPERTY DAMAGE!
► Do not use caustic, abrasive or solvent-based cleaning materials. These can
damage the surfaces of the appliance.
NOTE
► Empty the waste water tank
► Clean the dirt filter
putting it back into the waste water tank
Clean the appliance with a damp cloth. For stubborn soiling, add a little mild
detergent to the cloth.
SPR 330 A1
8
r
to apply water / cleaning solution from the spray
(see Fig. 9).
z
on the cleaning attachment
u
3
a
after each use and let it dry completely before
2–3 cm above the area to be cleaned and
Fig. 10
8
to brush the soiled area with
r
.
of the cleaning attachment
8
multiple times in the desired
2
to switch off the appliance.
after every use.
3
.
8
against the
6
before cleaning
GB │ IE │
11 ■