Silvercrest SPR 330 A1 Bedienungsanleitung Seite 12

s
Lift the attached seal of the fresh water tank up out of the opening (see Fig. 4).
Fill the appliance with tap water (see Fig. 5) or distilled water, and add uphol-
stery cleaning agent or W5 vinegar-based cleaner, if needed. Please observe
the processing instructions of the manufacturer. Make sure that the fresh water
s
tank is filled no higher than the MAX marking.
Fig. 5 Fig. 6
s
Press the seal of the fresh water tank entirely back into the opening (see Fig. 6).
s
Grip the fresh water tank by the handle and place it back in the appliance.
Push it forward into the appliance until it audibly clicks into place (see Fig. 7).
Fig. 7
GB │ IE │
SPR 330 A1 9 ■