Herunterladen Inhalt Inhalt Diese Seite drucken

Disclaimer Of Warranty; Network Security - Panasonic AW-HEA10WPJ Anleitung

Control assist camera
Inhaltsverzeichnis

Werbung

Before use (continued)

Disclaimer of warranty

IN NO EVENT SHALL Panasonic Corporation BE LIABLE TO ANY
PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR
REASONABLE MAINTENANCE OF THE PRODUCT, FOR THE
CASES, INCLUDING BUT NOT LIMITED TO BELOW:
A A NY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION,
DIRECT OR INDIRECT, SPECIAL, CONSEQUENTIAL OR
EXEMPLARY, ARISING OUT OF OR RELATING TO THE
PRODUCT;
B P ERSONAL INJURY OR ANY DAMAGE CAUSED BY
INAPPROPRIATE USE OR NEGLIGENT OPERATION OF THE
USER;
C U NAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION
OF THE PRODUCT BY THE USER;
D I NCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES
ARE NOT DISPLAYED, DUE TO ANY REASON OR CAUSE
INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;
E A NY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS
OR DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY
THE DEVICES OF THIRD PARTY;
F A NY DEMANDS FOR COMPENSATION, CLAIMS, ETC.
OCCASIONED BY THE INFRINGEMENT OF PRIVACY BY
INDIVIDUALS OR ORGANIZATIONS WHOSE IMAGES WERE
SHOT BY THE USER BECAUSE THESE IMAGES (INCLUDING
THE RECORDINGS MADE) WERE MADE AVAILABLE TO
THE PUBLIC FOR SOME REASON OR OTHER OR BECAUSE
THE IMAGES ENDED UP BEING USED FOR UNINTENDED
PURPOSES.
G L OSS OF REGISTERED DATA CAUSED BY ANY FAILURE.

Network security

As the unit is intended to be used while connected to a network, the
following security risks exist.
A Leakage or theft of information through the unit
B Unauthorized operation of the unit by persons with malicious intent
C I nterference with or stoppage of the unit by persons with malicious
intent
It is your responsibility to take precautions, such as those described
below, to protect yourself against the above network security risks.
• Use the unit in a network secured by a firewall, etc.
• If the unit is connected to a network that includes personal computers,
make sure that the system is not infected by computer viruses or other
malicious programs (using a regularly updated antivirus program, anti-
spyware program, etc.).
• Protect your network against unauthorized access by restricting users
to those who log in with an authorized user name and password.
• After accessing the unit as an administrator, be sure to close all web
browsers.
• Change the administrator password periodically.
• Restrict access to the unit by authenticating the users, for example,
to prevent setting information stored on the unit from leaking over the
network.
• Do not install the unit in locations where the unit, cables, and other
parts can be easily damaged or destroyed by persons with malicious
intent.
• Avoid connections that use public lines.
<NOTE>
Notes on user authentication
• The unit uses a basic user authentication function. We recommend
using a dedicated authentication device and using basic
authentication.
Using host authentication on HD integrated cameras
• To connect via host authentication on cameras equipped with a
host authentication function, refer to the operating instructions of the
camera to be connected and configure the appropriate settings.
Be sure to set the access level to "Administrator."
Usage restrictions
• We recommend connecting the unit, controller, and any computers to
the same network segment.
Events based on settings inherent to the network devices, for example,
may occur in connections that include different segments, so be sure
to perform checks prior to operation.
9

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis