Inhaltsverzeichnis
Werbung
Web screen operations
Live screen [Live]
This screen displays the camera images of the unit and allows you to perform operations to control the camera, such as panning, tilting, zooming, and
image brightness adjustment, from a personal computer.
1
3
1.
Live button [Live]
Display the live screen [Live].
2.
Setup button [Setup]
Display the Web setup screen [Setup].
3.
Power ON button [Power ON] / Standby button [Standby]
Turn on the unit or switch to standby mode.
• When the AC adaptor is connected, the unit switches to standby
mode automatically and the status display lamp on the unit lights
orange.
• When the unit turns on, the status display lamp lights green.
Turn on the unit.
[Power ON]
Switch the unit to standby mode.
[Standby]
<NOTE>
• Before turning on the unit, turn on all connected devices.
• After switching the unit to standby mode, turn off all connected
devices.
4.
Main area (IP video display area)
A red frame is displayed on the camera images when the tally on
signal is received.
2
13
4
5
11
8
6
12
7
5.
Zoom [Zoom]
Perform zoom operations.
Zooming up to approximately 2x is possible with the iA zoom
up to 4x with the digital zoom.
• For use with the PTZ Cntrl app for iPad, be sure to set 1.0x.
• For details on enabling or disabling the digital zoom, refer to "Digital
Zoom" (→ page 23).
• When PinP is displayed, switch the control mode [Control] to [Main]
before beginning operation.(→ page 18)
*
1
iA zoom: Zoom mode that maintains the beauty of HD image
quality.
Adjust the zoom (magnification) in the Wide
direction.
[‒]
Adjust the zoom (magnification) to 1.0x.
[×1.0]
Adjust the zoom (magnification) in the Tele
direction.
[+]
10
9
1
, and
*
17
Werbung
Inhaltsverzeichnis
