ABB STD-500MA Betriebsanleitung Seite 67

Operation
To cancel the basic brightness
• To cancel the basic brightness (to reset to minimum
basic brightness), press the MEMO pushbutton and
release this when the LED blinks for the second time.
To program Soft OFF
• Press the MEMO pushbutton and release this when the
LED blinks for the third time. The dimmer activates the
Soft OFF function.
To cancel Soft OFF
• Press the MEMO pushbutton and release this when
the LED blinks for the third time.
®
ABB i-bus
A wide variety of switching and dimming functions can be
performed via the EIB and Powernet EIB control modules
(6197-11-500 and 6997-11-500).
Refer to the relevant Operating Instructions, as well as to
the updated functional descriptions in the Technical Manu-
als and to the Databases.
/Powernet EIB Mode (see Fig. 2)
GB